Onewheel Bearing Press Spacers
Onewheel Bearing Press Spacers
3D
Published 2021-06-05T22:45:38+00:00
Please be careful when doing this, improper force applied to the hub casing can crack it and damage the bearings. You should only do this if you feel capable of pressing the bearing in straight with this method.
Don't have a proper bearing press (Arbor Press) and need to do a bearing swap on your Onewheel?
Here are a few 3D printed spacers so you can use a hammer to remove the old ones and press in the new ones.
Use the 48mm spacer to remove both bearings.
https://youtu.be/HnJLEA8l-bg
https://youtu.be/lG0l-Oy46qA
Use the 55mm spacer to press the right bearing in.
https://youtu.be/6WQNJ3m3AmM
Use the 55mm spacer with the 2020 pine dowel to press the left bearing in.
https://youtu.be/ZLrS3TqShD0
Please be careful when doing this, improper force applied to the hub casing can crack the metal. You should only do this if you feel capable of pressing the bearing in straight with this method.
| Date published | 05/06/2021 |
| Support Free | YES |