Over and Under (6x3mm Magnets, 14mm beads remix)
Over and Under (6x3mm Magnets, 14mm beads remix)
3D
Published 2021-08-31T12:38:38+00:00
After printing MakeAnything's The Chain and Astrolabicon, I solved them and found them pretty easy, so I wanted to print Oskarpuzzles' Over and Under using my same magnets and marbles so I modified this puzzle.
You will need: 48 14mm marbles and 12 6x3mm magnets.
I used 12 colors 4 marbles each for a good challenge but this is subjective. I'll be making a solve video soon.
OskarPuzzles' Over and Under:
https://i.materialise.com/en/shop/item/over-and-under
Need a harder challenge? Check out my Spaghetti Junction twisty sliding marble puzzle remix: https://www.myminifactory.com/object/3d-print-spaghetti-junction-6x3mm-magnets-14mm-beads-remix-183307
Resolution: 0.15mm
Infill:10%
Use 4 walls
To maximize adhesion and no warping, print with a brim
Optional: 80 Degree area support for the wider overhangs
Push clip in one hole and twist it to loosen it up
Use adhesive or superglue to fasten magnets in
| Date published | 31/08/2021 |
| Support Free | YES |