Paint Brush & Modelling Tool Organizer
Paint Brush & Modelling Tool Organizer
3D
Published 2022-02-04T10:21:19+00:00
A storage tray and organizer for paint brushes, modelling tools and sculpting tools.
There are two halves which can be assembled in three different combinations to create three distinct layouts, each with a different set of storage spaces, so you can choose the combination which best suits the brushes and tools that you need to store (glue will be required to assemble the two halves).
The medium-length spaces (of which there are two when you combine halves A + B or A + A) are long enough for most paint brushes and tools, but there is also space for longer paint brushes or tools in the longer spaces (of which there is one when you combine halves A + B or A + A, and three when you combine halves B + B). The small space is great for things like modelling putty and paperclips.
There are two versions of each half, one with holes for magnets, and one without. 3 mm x 3 mm neodymium magnets can be inserted into the top and bottom corners of the versions with magnet holes, allowing multiple organizers to be stacked and stored on top of each other.
Print two halves (this can be one of each half, A and B, or the two of the same half) and glue them together. There are holes in the flat side of each half for 1.75 mm filament (or similar sized plastic or metal rod) which can be used to help align the two halves when gluing them together.
If you have printed the versions with magnet holes, push or glue in eight 3 mm x 3 mm neodymium magnets (one in each of the four top corners and one in each of the four bottom corners).
Each half is 130 mm x 80 mm x 18 mm. Once assembled, the overall dimensions of the paint brush & modelling tool organizer are 260 mm x 80 mm x 18 mm.
| Date published | 04/02/2022 |
| Dimensions | Each Half: 130 mm x 80 mm x 18 mm |
| Support Free | YES |