Phone Dock (Moto G)
2,873
views
70
downloads
1
collection
0 comments
Loading comments...
Phone Dock (Moto G)
3D
Published 2016-02-11T16:15:22+00:00
6
0
Add to Collection
Description
Dock for Moto G phone. There is a fair amount of friction in the connector so the phone needs to be pressed down instead of just dropped into the dock.
Requires the following parts
- 6-32 set screw, approximately 1/4 inches in length (to hold the cable in place - do not over-tighten)
- StarTech right angle USB Cable http://www.amazon.com/StarTech-com-Micro-USB-Cable-UUSBHAUB1RA/dp/B003YKX6WC (if you use a left angle cable, you will need to mirror the part.
- A few inches of 1.75mm NinjaFlex filament for the base (red in the pictures)
This design tends to warp when using ABS, I'd recommend a non-warping plastic like PET or PLA.
Technical Information
Date published | 11/02/2016 |
Technology | FDM |
More Information
Object Parts