Pi Zero W Case: Circuitry
Pi Zero W Case: Circuitry
3D
Published 2018-07-06T14:44:53+00:00
I wanted a Raspberry Pi Zero W case that had a little colour to it, and didn't find anything I liked. So I designed some!
This is one of several designs that share the same outer body shape, but differ in terms of their ventilation apertures. The designs are all compatible in terms of inners and outers, so mix and match if you like! The components are designed to be a tight fit, so as to require no glue or other hardware to hold things together.
All the designs can be found here:
Have fun!
Easy print, no supports required, just some minor bridging that any reasonably configured printer should be able to handle without difficulty. You'll want to make sure there's no elephant footing on the inserts, of course, since they're a tight fit inside the outer body!
| Date published | 06/07/2018 |
| Support Free | YES |