Poly Planter
Poly Planter
Published 2018-06-06T12:12:19+00:00
These little planters are great homes for your succulents and other small plants. It’s low poly design gives it a modern look and feel. I designed it to print with no supports so it is ready right off the printer. For those who don’t have any succulents and want something to display until one is purchased, I have also designed a 3D printable succulent which can be printed multicolor for those who do not have multicolor printers.
Please view printing details for more info on the multicolor succulent.
To print the the succulent, you will need green and white filaments(both the same material). First you must print the "succulent poly plant 1" in green. Once printing is finished, remove the boarder corners and print the "succulent poly plant 1(2)" in white. The boarders are just to make sure the model is in the same spot in the sliced, for both designs. After printing finishes, remove it from the print bed and roll it up longways. Once the desired diameter is accomplished, glue it to stay rolled up. You may bend the leaves to achieve the desired look for your succulent.
Date published | 06/06/2018 |
Time to do | 30 - 84 minutes |
Material Quantity | 8 grams |
Dimensions | 43.25mmx49.91mmx40.45mm |
Support Free | YES |