Powerbank V1
Powerbank V1
Published 2020-11-09T11:15:33+00:00
I needed power on the go to edit or watch a movie without the need to look for a power outlet all the time so i designed this beast off a powerbank.
You can adjust the output to your liking so it can be used for all power related projects by a flick of the switch.
My system has a 21 cell 18650 design with 2000mah/piece so with the new generation of 3000+ you can make a bank with 200+WH.
This model is an exact copy of the 1 i used in my video, if you feel like it then try it out and design your own powerbank.
Make sure to share it with me as i would love to see another take on it.
All other components are easely found on aliexpress or banggood links below:
Printed in PETG speed 30 mm/s .16 layer line no support for the 2 shells and print them standing up.
The part where the display sits in needs a bit off support for the overhangs but all the vent holes are fine.
Supports needed for the carriage, need some sanding to slide smooth into the rail.
To keep it all together i used a drip off hot glue on 2 corners, that way you can still open it up fairly easy.
All other components are easely found on aliexpress or banggood.
You can watch the vid in this link:
Date published | 09/11/2020 |
Dimensions | 275mmx100x100 |