Raspberry_Pi3B+_Pi3B_Pi2B_Pi1B+_case
Raspberry_Pi3B+_Pi3B_Pi2B_Pi1B+_case
3D
Published 2018-10-28T22:12:16+00:00
This is an remix of Raspberry Pi 3 (B/B+), Pi 2 B, and Pi 1 B+ case with VESA mounts.
The improvements are:
Removed Vesa mounts
Made screw fasteners internal to reduce footprint
Made 1mm narrower for improved fit
Slightly taller to cover USB connectors, < 1mm above lip of connectors
Reinforced studs with expansion relief to minimize easy breakage and interference.
2 versions of top, one with pin connector slot open, one with original break away slot.
Screws required are 2.5mm self tapping plastic fasteners. Length 8-10mm. Head diameter is 4mm.
This was created in Sketchup Make 2017 and the files are included.
An RPi 3B+ fits perfect. I can't vouch for others as I don't have them.
I printed in PLA with 4mm nozzle @ 0.15mm layer height, 205/200°C, and 50mm/sec. Your printer may vary.
| Date published | 28/10/2018 |
| Support Free | YES |