---------Build Instructions Added ------
---------Fan Cap added New Impeller added Fan Cap magnet Holder added 2-29---
---------Wiring Diagram Added 2-9-20------------

This an easy to print inexpensive resin wash Station I'm using to clean Elegoo Mars prints

Included is the basket, fan cap ,Fan cap magnet holder ,basket impeller and fan impeller.

i'm still making improvements to the files so a few of the pictures may differ from what I have printed and installed so far(I will be sure to add notes as the parts Change)

If you have any questions, please ask or would like pics of how to wire up every thing please let me know .

List of parts you would need to make this work

1x Better Homes & Gardens Square Flip-Tite Storage Container From Walmart 5x5 size

2x Rare Earth Magnets, 10 Pc. harbor Freight 67488

1x 80 mm case fan ( I snipped off the blades on mine) to reduce the sound

1x Female Panel Mounting Connector

1x 12v power adapter

1x Potentiometer 1 Turn 1 watt

1x NMOSFET

1 x 608zz Bearing

-----Building instruction---

-After printing cut the Blades from your 80 mm fan
-Apply glue to the top of the fan and attach the fan cap ( wait for glue to dry)
-Apply 4 rare earth magnets to the fan cap magnet holder then attach to the fan cap with a screw ( with the magnets pointing up
-Wire your fan, potentiometer ,power switch,and power switch using included diagram
-attached your wired devices to your printed Base.
-Attach oiled 608zz to the basket impeller 4 glue magnets to the bottom of your impeller then attach to your basket

Always start the fan slowly when starting or the impeller attached to the basket will not turn
Wash Station remixed from https://www.myminifactory.com/object/3d-print-resin-printer-washing-station-87590

Impeller remixed from https://www.thingiverse.com/thing:3848077

https://www.harborfreight.com/10-piece-rare-earth-magnets-67488.html

https://www.walmart.com/ip/Better-Homes-Gardens-Square-Flip-Tite-Storage
Container/605121552?