Retropie drinkcoaster


Retropie drinkcoaster
Published 2019-12-02T18:58:57+00:00
This is a retropie drinkcoaster. Print it in your favourite color and material.
I have printed this model in multi-color, with a single extruder. It is also possible to print this model with one color!
Use this coaster to place your favourite drink. If you have printed it, don't hesitate to show of your skills and upload a picture.
This is a standard size coaster (100 by 100 by 5 mm), to fit in my coasterholder:
thingiverse.com/thing:3130397
Made with love by:
Raimon of IdeaLab
I have printed this model with Ultimaker white PLA and Polymaker Polysmooth slate grey. I used 0.2mm layer height and, 18% infill. I used a 0.4mm nozzle with my extruder at 210 degrees Celcius. I used a heated bed. To avoid the curling up at the bottom i used a brim. I paused the print at the point when the text began, changed filament, and resumed the print.
Date published | 02/12/2019 |
Time to do | 220 - 221 minutes |
Material Quantity | ~ 21 gram |
Dimensions | 100mm x 100mm x 5mm |
Support Free | YES |