Reverb G2 Gunstock
Reverb G2 Gunstock
3D
Published 2021-02-18T11:35:27+00:00
This is a VR gunstock for the HP Reverb G2 controllers. The controller holders slide on the stock and can be set at different positions using the removable peg. The centre positions work great for most weapons in Onward and Pavlov.
2021-08-08 v1.1 updated the grips with a stronger base, lengthened the pins, adjusted front strap position.
2022-12-07 v1.2 Moved strap attachment eyelet to the front end so it woulnd't interefere with swapping out the controller holders.
Print models as situated in the stl file. The controller grips should be printed on a raft for best results. They are set to print at 45 degrees to be stronger and to minimize support material.
The test prints were done at a layer height of 0.28 mm. Also printed a set at 0.2 mm which turned out much nicer. I recommend a 1.2 mm wall thickness and >20% infill for added durability.
The non-adjustable parts should be glued together and/or taped at the joints.
| Date published | 18/02/2021 |
| Time to do | 1490 - 1491 minutes |
| Material Quantity | 329 grams |
| Dimensions | 529mm x 51mm x 168mm |