Revolving Lithophane LED Lamp - wifi Controlled
$3.00 Revolving Lithophane LED Lamp - wifi Controlled
Published 2019-04-15T07:20:12+00:00
A fully 3d printed LED lamp, controlled via mobile app through wifi and an Wemos D1 module. Prints completely without supports and interchangeable lithophanes.
NOTE: Minimum Printer dimentions: 180x180x80
Instuructions can be found here: https://youtu.be/duiAbLsXZSE
Arduino IDE Sketch Here: https://www.dropbox.com/s/7r52tcwwm6v2i75/LED_Stepper.ino?dl=0
Items Needed (Affiliate links):
Wemos D1: https://geni.us/WemosD1
Step Down converter: https://geni.us/LM2596
Switch: https://geni.us/Switch1
DC Jack: https://geni.us/DCJack
Stepper motor and driver: https://geni.us/MotorandDriver
6004 Bearing: https://geni.us/6004Bearing
1 meter LED Strip (60 leds/m): https://geni.us/WS2812B
Female to female jumper cables: https://geni.us/Jumpercables
some M3x10 and M3x5 (around 12 and 5 respectively)
Optional:
PSU: https://geni.us/PSU9v1
Rubber Feet: https://geni.us/RubberFeet
no supports requires, print at 0.2mm layer height and 20% infill
| Date published | 15/04/2019 |
| Price | $3.00 |
| Dimensions | 175mm x 174.97mm x 82mm |
| Support Free | YES |
