This is a Roman Praetorian Centurion 1st-2nd C. A.C.
This model can be used both as a regular centurion or as a Centurion Trecenarius who was the first and prime of all centurions of the Praetorian Cohorts.
The Praetorian guard were elite soldiers of the Imperial Roman Army, that were serving as personal bodyguards and intelligence for Roman Emperors or high ranking officials, during the Roman Republic and Roman Empire periods.
Things to know about the Praetorian Guards:
They were formed during the Roman Republic era
They were auctioning their support for the emperorship.
They were infamous for taking part in the assassination of several emperors.
They performed at the Roman games.
They were part of the firefighting force.
They had a fortress like camp, the Castra Praetoria.
They had a cavalry The Speculatores Augusti.
Do you know more about the praetorians? Let us know
Print it, Paint it and create your story!
Remember to tag us on Instagram or post your creation in our Discord or Facebook Group.
Facebook Group: https://www.facebook.com/groups/minormous
The figure is 75 mm tall to the eye. It was created to be as historically accurate as possible.
It is created with realistic proportions.
This model comes fully and professionally Pre-Supported!
It comes in parts for easier printing. It will require assembly.
-Not Supported Stl Files.
-Pre-Supported Stl Files
-Lychee source files for the Pre-Supported Stls.
Note that a minor post-process may be needed for a perfect fit depending on the resin and the shrinkage percentage, etc.
Q: Can I change the scale of the model for more heroic proportions?
A: The proportions will stay the same but the model will appear bigger thus it will resemble a more heroic look. The figure is 75mm to the eyes. To make it 80mm or 85mm to the eyes, you will have to scale the model 106,67% and 113,33% respectively.
Q: My model is smaller when printed why?
A: It is probably because of the resin shrinkage percentage. Make sure to scale the model up according to the resin shrinkage percentage. For example, if the resin shrinks 5%, then you will have to scale the model (all the parts) in the slicer to 105%.
Q: My model appears small when importing in the slicer. how to fix that?
A: Scale the model up 10 times or at 1000% and the models should be at the correct size. 75mm to the eyes.
Q: My model appears red when importing in the slicer and it says that there are issues with the topology. Why?
A: This is most likely a glitch since we have already test printed our models multiple times with no issue at all. Joins us on Discord and share your experiences.