This is a Roman Praetorian Guard 1st-2nd C. A.C. in action.
The Praetorian guards were elite soldiers of the Imperial Roman Army, that were serving as personal bodyguards and intelligence for Roman Emperors or for high ranking officials, during the Roman Republic and Roman Empire periods.
Print it Paint it and create your story!
Remember to tag us on Instagram or post your creation in our Discord or Facebook Group.
Facebook Group: https://www.facebook.com/groups/minormous
The figure is 75 mm tall to the eye. It was created with the intention to be as historically accurate as possible.
It is created with realistic proportions.
This model comes fully and professionally Pre-Supported!
It comes in parts for easier printing. It will require assembly.
Note that a minor post-process may be needed for a perfect fit depending on the resin and the shrinkage percentage, etc.
Q: Can I change the scale of the model for more heroic proportions?
A: The proportions will stay the same but the model will appear bigger thus it will resemble a more heroic look. The figure is 75mm to the eyes. In order to make it 80mm or 85mm to the eyes, you will have to scale the model 106,67% and 113,33% respectively.
Q: My model is smaller when printed why?
A: It is probably because of the resin shrinkage percentage. Make sure to scale the model up to according to the resin shrinkage percentage. For example, if the resin shrinks 5%, then you will have to scale the model (all the parts) in the slicer to 105%.
Q: My model appears small when importing in the slicer. how to fix that?
A: Scale the model up 10 times or at 1000% and the models should be at the correct size. 75mm to the eyes.
Q: My model appears red when importing in the slicer and it says that there are issues with the topology. Why?
A: This is most likely a glitch since we have already test printed our models multiple times with no issue at all. Joins us on Discord and share your experiences.