RPI 3B VESA MOUNT 100MM
A mount to suit a 100 x 100mm VESA monitor or monitor mount so that you can mount a Raspberry Pi 3B on the back of your monitor, or on your monitor mount. The mount has 3mm holes for the RPi and 6mm holes for the monitor. I have attached the source file which is a Fusion 360 file, if you cant use a Fusion file then leave a comment and I can upload in a different format. Please remember to link to this design if you modify the source file and put it somewhere else.
The Mount - 3D Printed / CNC Routed / Laser Cut.
M3 x 18mm screws x 4 - hobby store / eBay.
M4 x 25mm screws x 4 - hobby store / eBay.
M3 x 7mm spacers x 4 (I used 7mm spacers because they were what I had, but you can use any size, you just need to use different size M3 screws.) - hobby store / eBay / 3D Printed.
M4 x 10mm spacers x 4 (Same as the M3 spacers) - hobby store / eBay / 3D Printed.
M3 nuts x 4 (If you adjust the hole size then you can screw straight into the plastic and not use nuts.) hobby store / eBay.