SC5M Wheelie Bar Mount
$4.99 SC5M Wheelie Bar Mount
Published 2020-07-08T14:36:20+00:00
This mount allows you to run a Traxxas style wheelie bar on the SC5M platform for No-Prep Drag Racing.
This mount is only compatible with the SC5M shock tower
I recommend using 4 M3x20mm Screws with Nuts to hold on the wheelie bar.
A good wheelie bar is the strc version. Part Number - ST3678W
Or check out RC Racing Innovations for some sweet carbon fiber bars
Print in the orientation the model loads into your slicer (as shown in the photo with the supports). Use at least 5 layers of dense supports. 0.15-0.2mm layers have been shown to be the strongest (CNCKitchen). Print this part with at least 4 perimeters and at least 50-100% infill. I recommend printing with PETG, ABS, Nylon, or Polycarbonate. Print at a relatively high temp to get the best layer bonding possible.
| Date published | 08/07/2020 |
| Price | $4.99 |
| Dimensions | 61.5mm x 24.34mm x 61mm |
