Screws or small items organizer with magnetic lid
Screws or small items organizer with magnetic lid
3D
Published 2019-05-26T19:00:25+00:00
When I found myself with a bunch of expensive titanium screws and other knife making bits laying around in drawers, I decided that something had to be done. So I started designing these little boxes with magnetic lids. This is just the first of many different sizes and configurations.
The box you will download won't have our Todd Knife and Tool logo on it, if you want the logo we'll upload the boxes to that account soon.
I printed them in Silk PLA but most materials will work fine.
The Magnet holes are for 8x2mm magnets that you can get on Amazon at this link:
I print these at .3 layer height, but they come out buttery smooth at .15
15% infill 3 bottom layers 4-5 top layers and 3 perimeters.
No support needed and the orientation of the STL files should have you set up and ready to print.
If you have a large printer use the Screw Box No Logo stl for both parts
For smaller printers the other two files split up the parts individually
| Date published | 26/05/2019 |
| Time to do | 7 - minutes |
| Material Quantity | 116 |
| Dimensions | 127x183x19 |
| Support Free | YES |