Sculpey Super Slicer Handles and Stand
Sculpey Super Slicer Handles and Stand
3D
Published 2018-07-13T13:31:39+00:00
If you've used the Sculpey Super Slicer set, you'll know that the blades are great, but the single pair of handles is just awful. Also, there's only one pair, for four blades. So, let's fix that!
These handles are sized to fit the Sculpey blades, including mounting holes to slot in two 6mm M3 bolts and nuts. I just love the way the bolts look, but really, you could pop a zip tie in there, or even just glue it. The blade fits fairly tightly into the handles as it is - be careful getting them in there!
As for the stand, it's designed to hold each blade by resting on the handles, rather than on the blade edge.
The Sculpey blades are really quite cool - give them some more worthy handles!
No supports required - take care of the orientation of the handles, though! The slot for the blade should be vertical. There's some overhanging in the holes, of course, but nothing that a reasonably well calibrated printer couldn't handle easily.
| Date published | 13/07/2018 |
| Support Free | YES |