SCX24 TGH-24X Electronics Trays
5,120
views
330
downloads
5
collections
0 comments
Loading comments...
SCX24 TGH-24X Electronics Trays
3D
Published 2021-03-29T15:55:15+00:00
20
0
Add to Collection
Description
Electronics trays for the TGH-24X carbon fiber chassis (https://www.teamgaragehack.com/products/tgh-24x-chassis). I say again, these WILL NOT fit the stock chassis.
There are flat versions and a version of each side with a vertical mounting plate at different locations.
- Confirmed fitment on the SCX24 Deadbolt and C10 models. The Jeep JLU and Betty are untested.
- After printing, drill out the front three holes with a 1.5mm bit and the back hole with a 1.15 or 1.2mm bit to ensure proper fitment.
- An extra M1.4 x 5mm screw (stock size) will be needed for the back.
License
Printing Details
- All versions require supports, due to recesses for the skid screws.
- PLA and PETG tested successfully
- Recommend 0.2 layer height
- Wall count: 3
- Infill: 10%
Technical Information
Date published | 29/03/2021 |
Time to do | - 37 minutes |
Material Quantity | 5g |
More Information
Object Parts