AESERA19 - Seraphim - Chamber of Summoning
$4.00 AESERA19 - Seraphim - Chamber of Summoning
Published 2021-01-07T12:20:21+00:00
This set, Chamber of Summoning, was built upon the request of a few different patrons who had individual requests. A normal hinge door has long been requested by several patrons, so we wanted to take this opportunity to get that fixed first. The No Edge Curve Wall was another model that was also requested by multiple patrons. A new Seraphim specific circle of magic was a third request. We packed it with a few additional remixes and round out a full expansion. We hope you enjoy it, as this is the 19th in the line of the Seraphim Series.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: Brim helpful on small items
Date published | 07/01/2021 |
Price | $4.00 |
Support Free | YES |