AESERA20 - Seraphim - Vinegrove of Juve
$13.00 AESERA20 - Seraphim - Vinegrove of Juve
3D
Published 2021-06-01T08:45:59+00:00
This set, Vinegrove of Juve, is the 20th in the Seraphim Series. Carl with a little bit of Will’s help, worked this one up as a capstone to 20 sets in 2 years. This is the finest set of Seraphim terrain made, with extensive vines growing on models, damaged and ruined versions, shortwall versions, and tons of new sculpts to match a vine-covered wing of a Seraphim Setup. 67 new models, mostly dragonbite compatible tiles are included with this release.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35%% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 01/06/2021 |
| Price | $13.00 |
| Support Free | YES |