Shadow Master (or simpler : sunshade wind blocker)
966
views
22
downloads
0 comments
Loading comments...
Shadow Master (or simpler : sunshade wind blocker)
3D
Published 2020-09-11T21:35:16+00:00
5
0
Add to Collection
Description
A simple device to prevent your directional sunshade in place from rotating in the wind.
The "staff" of the sunshade has 38mm diameter and the bottom part is design to fit a 50mm table hole.
I wrapped the staff with 1 or 2 layer of electrician tape and it wont slip.
Clearly, it won't resist to a storm but it works like a charm with light to medium breeze/wind.
License
Printing Details
It will need some strength so 1.2mm walls width and 1.44mm for top and bottom. 40% of 3D cubic infill
0.24mm layer height (refer to this video: https://www.youtube.com/watch?v=WIkT8asT90A)
The bottom part can be mounted upside down under the table to be more discrete.
Technical Information
Date published | 11/09/2020 |
Time to do | 120 - 180 minutes |
Material Quantity | 29g |
Dimensions | 19mm x 66mm x 76mm for the bigger part |
Support Free | YES |
More Information
Object Parts