Shelf Security Camera Mount
Shelf Security Camera Mount
3D
Published 2019-10-09T09:13:16+00:00
This is a Security Camera mount that needs no hardware to install. I designed this specifically for people who rent houses and apartments in mind. We all know about the strictness of some renters when it comes to putting holes in walls for hanging pictures and of course security cameras in our homes. This mount is designed to slip firmly to the the top shelf of any tall Walmart shelves without hardware as you see in my pics.
In my printing, I had a electrical blackout in my neighborhood in the middle of my print which lasted for HOURS!!! which in turn I was forced to print mine in two sections and then assemble together. Nevertheless, my print was still a success. Mounting my cam was a success.
I printed mine with Hatchbox PLA Black with 50% infill, gyroid pattern, Layer height at 3mm, wall thickness at 1.5mm. I did this on purpose in order for the mount to hold the weight of the security camera. The cam is mounted onto the mount using two 3mm X 20mm bolts and nuts.
Standard Quality
Layer Ht.- 0.3mm
Wall thickness- 1.5mm
Infill- 50% Gyroid
Printing Temp- 205 C
Bed Temp- 60 C
Bed Adhesion-Raft
Print Speed- 50mm/s
| Date published | 09/10/2019 |
| Material Quantity | Hatchbox PLA Black, 213g-71.38m |
| Dimensions | 152.4 mm X 100 mm X 40mm |
| Support Free | YES |
