Shower toothbrush accessories hanger
Shower toothbrush accessories hanger
Published 2021-04-30T08:52:24+00:00
My first 3d Drawing after 2 goes at Fusion 360, happy to share with others that may be interested or have ideas for it. i will be adding things over time, if the interest is there. be sure to hit me up for more info if needed.
Printer CR-10 v3
I'm using Chep's Printing settings with slight adjustments to my personal experiances and likings
Dimensions: Roughly 240mm wide by 100mm high suitable for a 10mm or 11mm screen thickness
0.20mm print
Print speed 60mm/s
Print temp: 200c
Bed temp: 50c
Infill: I did 75% on this i think but have done with 35% with the same results
Infill pattern: Traingle (my preference)
Supports: On everything
Made on Fusion 360
Raft: Yes for me, I personaly like the added security of the raft, base of the print finish and keeping it stuck to bed during buildtime. It is your choice (im not really good without the raft for some reason)
Plastic: Pla+ Esun... Plan to so this in ABS soon enough
This was built as my shower does not have very much storage and so far this is covering some aspects of storage (will be adding more to it) It just simply hooks over the top of my shower screen (Bone White print)
Let me know your thoughts!! Hope it's usefull to some
Date published | 30/04/2021 |
Some pics i forgot to add.Printed on CR-10 v3