SHROOM (DIY Mood Lamp Kit)
SHROOM (DIY Mood Lamp Kit)
3D
Published 2020-04-22T02:35:12+00:00
SHROOM is a special design for the DIY Mood Lamp Kit availabe from Electromaker. In a era where everything is straight and symmetrical, SHROOM goes againts the flow, with a completely curved and asymmetrical design that will fit perfect with the special patterns of led. The parts were drawn and reflected to simplifiy the printing and use of material. After some tests with different kind of lights, I decided to change the interior of the shade for better result with the led light.
COLORS: I recommend the white for the shade, it will have better reflection of the del light.(transparent red is on the picture)
Click the link below for more informations about the electronic kit and for the other STL of the project.
https://www.electromaker.io/kits/led-mood-lamp
Take care.
Shade (Head of the shroom)
0.15 Layer Height
30 mms speed (for the exterior)
100% infill (136g)
No Supports (Yeah!)
Stem (Body of the shroom)
0.15 layer height
30 mms speed (for the exterior)
100% infill (50g)
No Supports, but I suggested a small brim just too be sure!
| Date published | 22/04/2020 |
| Time to do | 1440 - minutes |
| Material Quantity | 186g |
| Support Free | YES |