Small House V1
Small House V1
Published 2021-01-22T10:24:54+00:00
This is a two story small house structure with an outhouse in the back. There was one slight issue on the first floor when I printed the model out. The very top of the outhouse did not blend in with the bottom of the second floor. So when I printed the bottom floor, it printed the whole top of the outhouse (please see photo provided). Unless that portion of the outhouse is removed from the model before printing, you will need to do some sanding before installing the first floor.
The small house model was printed on my Prusa Mini, .2mm layer height, 10% infill, with silver PLA filament. The bottom floor took 22 hours to print and the first floor took 14 hours to print. I did not use any supports when printing the model.
Date published | 22/01/2021 |
Support Free | YES |