Smart Temperature Tower - Artillery Genius Remix G-Code
Smart Temperature Tower - Artillery Genius Remix G-Code
3D
Published 2021-04-05T17:01:48+00:00
This is a G-Code remix of https://www.thingiverse.com/thing:2729076 for the Artillery Genius.
Includes Original stl files and the generated & modified g-code for the Genius.
I made the G-Code in cura so that they will print on the Genius and edited the temperatures for the different filament types (ABS/PETG/PLA/PLA+/PLA-Silk*)
For editing the temperatures, I used CURA 4.8 Post Processing Scripts "ChangeAtZ 5.2.1 Experimental" and manually added the temperatures at the specific layer Numbers.
*Note- PLA-Silk is the same as PLA+ but with the print speed reduced to 30mm/s while all other speeds are at 60mm/s
**Note 2 -- Retraction was set to 0.5mm for Silk and PLA+, default of 2mm for the others
Height Changes are as following
Layer 0 = Beginning/Highest Temp
Layer 56
Layer 106
Layer 156
Layer 206
Layer 256
Layer 306
Layer 356
Layer 406
Layer 456 = Last Temp Change
| Date published | 05/04/2021 |
| Support Free | YES |