Smiling penguin keychain and sink cap
Smiling penguin keychain and sink cap
Published 2020-11-13T14:47:36+00:00
This is my original creation. The smiling penguin is available standalone full-sized or scaled down into a keychain or sink cap. Use the files with the "-merged" suffix for 3D printing. The original 3D drawing files (in 3mf format) are included. They were drawn using Microsoft 3D Builder. The drawings were sliced using Cura software (v4.2.1).
I have successfully printed the sink cap and keychain using white Ultimaker TPU as shown in the photograph. They have been painted.
Filament: Ultimaker white TPU
Layer height: 0.2 mm
Wall thickness: 1 mm
Wall line count: 2
Top Thickness: 0.6 mm
Top Layers: 3
Bottom Thickness:
Bottom Layers: 3
Infill density: 10%
Infill pattern: Cross 3D
Printing temperature: 223 degC
Build plate temperature: 60 degC
Enable Retraction: No
Print Speed: 25 mm/s
Enable Print Cooling: Yes
Support: linear support everywhere
Support overhang angle: 50 deg
Support density: 15%
Support infull layer thickness: 0.2 mm
Build Plate Adhesion: Brim with width 5 mm.
Date published | 13/11/2020 |
Time to do | 20 - 60 minutes |
Dimensions | 36 mm x 36 mm x 45 mm |