Smok Majesty Case with Charger Holder
Smok Majesty Case with Charger Holder
Published 2019-08-21T00:30:15+00:00
This case is for the Smok Majesty Mod
My charging cable would keep falling out while using my device...especially while driving. I decided to make a case that would hold the charger in place. I uploaded 2 files, one with the charger holder and the other without. The one without the holder was my prototype to confirm the devices fit inside of the case. I figured I would upload that as I have been using it while not charging as an everyday case.
The mod has a nice snug fit inside of the case. Initial insertion was very tight but it opened up and is easily removable since then. The cases feature a slightly open bottom to aid with removal.
Simply slide the charger head into the charger port diagonally first, then slide the cable inside of the prongs to square the cable to the device. From here you should easily be able to insert the charger into the device.
The holder has a little play in it to allow slight variations in charger sizes. I tested 2 different chargers that I had on hand and both fit nicely.
0.2mm PLA
Printed zig zag supports everywhere and they removed very cleanly.
Date published | 21/08/2019 |