SongBird Mk.3+
SongBird Mk.3+
Published 2021-10-05T16:54:49+00:00
A new set of improved STLs called the MK3+. This set will have all the tweaks and finishes we have worked on over the last couple of months. Instructions and Setup & Calibration Guide also included.
These upgrades include:
*C1: Added crucial recess for M8 nut - M3x6 screws won’t tap otherwise.
F1-3: Reduced height of feet so that M3x16 screws tap better.
F2: Added Fixing for nyloc nut
A6a: Made hole slightly bigger to accommodate new carbon tube.
A6b: Made hole slightly bigger to accommodate new carbon tube, also made a hole in base tighter for tap.
A7: Made longer to ensure it grips the pin correctly.
A8: Made shorter.
B2: Countersunk fixing hole so M3x10 bolt grips the nyloc nut correctly.
Additions:
T1: Multi-head magnetic screwdriver
A9: Scaleable anti-skate weight
A10: Shim to lift A1 if felt slip-mat is being used. Note: This STL is in the incorrect orientation and needs to be rotated 180 degrees in your slicer so the flat face is on the bed!
*C1 is the only part that is essential to reprint if you’ve already done so, but we recommend reprinting all the new + files as well as the additions.
Date published | 05/10/2021 |
Support Free | YES |
Hey, I loved it ! thank you so much. it was really fun to print and assemble, all that left to do is the calibration. the only thing that was not perfect is part A7 - the height of the pars is too short, so I re-designed it and it hold the pin nice and firm ,I will send it on the remix but be aware that I still didn't play any record so I don't want to take any responsibility. Again - thank you !!