Speed Boat
Speed Boat
3D
Published 2020-09-17T21:45:19+00:00
This is the improved Hull Design of a speed boat I recently made. Just wanted to share it here with you. Feel free to post it anywhere you want but please don't forget to mention me.
I will probably create some stabilizer hydro foil fins in the future, but they are only optional.
For the Project I recommend:
1x4000kV Motor
1x ESC ca. 50 Amps
1x 2-4 s LI-PO Battery with high dischare (45 C or more) and 2 or more Ah capacity
1x 9g Servo or better
1x 27mm nylon boat propeller (or larger/smaller, depends on motor torque and rpm...)
1x 6mm diameter or smaller brass or stainless axle
1x stainless or brass tube with OD 8mm and ID 6mm or smaller for the rear bearing
some bolts and nuts
some styrofoam
some glue, filler and acrylic paint
organic oil for lubrication
some wire and wires
| Date published | 17/09/2020 |
| Support Free | YES |