ST3930 LED Strip Mount
ST3930 LED Strip Mount
3D
Published 2020-10-11T07:25:17+00:00
Slide in V-slot mounts for the ST3930 LED Light bar.
These were designed to fit an Ender 3 but can be used for almost any printer using a similar design and extrusions. The LED bar fits very nicely between the Z-axis supports providing even light coverage.
The holes are undersized so you can use the original self tapping screws that come with the LED strip.
NOTE: The ST3930 uses 12vdc, if you plan on powering them directly from a 32bit Ender 3, Ender 3 V2 or any other 24v printer you WILL need a dc step down converter or you'll damage the LEDs.
Printed on Ender 3 V2, sliced with Cura
Material: PLA
Layer Height: 0.2
Infill: > 30%
Wall lines: 3+
I used ironing on the top surface for a smoother finish.
| Date published | 11/10/2020 |
| Support Free | YES |