Stackable Prusa face shield remix
Stackable Prusa face shield remix
Published 2020-04-17T16:46:22+00:00
This is a remix of the first revision (RC1) of the Prusa face shield:
I removed the hexagons from the strip touching the forehead for faster print times and made custom supports for the tabs so no other supports are used.
All pieces are 0.2mm apart on the z axis with good enough results, I will try a 0.1 separation later but i don't trust them to part easily.
Stp included so you can change the tolerances to best match your printer capabilities.
This is the only face shield that fits my modified Tronxy X1 (160x160 heated buildplate), so in order to get the most confortable fit I used ABS instead of PLA.
Files include:
Single face shield (prusa r1-1)
2 face shields stacked (prusa r1-1-stack-2)
5 face shields stacked (prusa r1-1-stack-5)
stp of 2 face shields stacked (prusa r1-1-stack-2-stp) on zip
Check https://www.prusaprinters.org/prints/25857-prusa-face-shield for the dxf to match the shield to this print.
0.4 nozzle, 0.2 layer height
2 perimeters, 5 top, 3 bottom, 0%infill
Date published | 17/04/2020 |
Material Quantity | 23.3g |
Support Free | YES |