Must See YouTube Commercial & Assembly Instructions. EASY ASSEMBLY
The Launch- Puzzle Box is an original design by Leisure Luke. It's a 22 Piece Puzzle Box that is SUPER EASY TO PRINT! No Supports Needed. Print it in PLA! Parts without squiggly springs can be PETG or PLA. Very little plastic used!
0.1mm tolerance for all non-sliding parts.
0.2mm tolerance for sliding parts
0.05mm increment tolerance for Rocket Tip to fit Rocket Base. You want this snug, but easy to pull apart.
T6_222_Alien - Red
Clip_Print_4_of_These - 2x Red
Wheel_3 - Red
Launch_Spring - Gold (hidden)
Rocket_Fins - White
Rocket_Tip - White
Wheel_2 - White
Dice_Face - White
Rocket_Button - White
Button_Spring - White
RLB - White
RLT - Blue
RLM - Blue
Clip_Print_4_of_These - 2x Blue
Key_Hole - Black
PartB - Black
Face_NASA - Marble
Launch_Lid - Marble
PV4_Base - Marble
You should be able to straight from the PRINT bed to ASSEMBLY! No External parts needed - no metal springs, no bearings, no magnets, no electronics, NO GLUE, NO SANDING... you get the idea!
As tested - 100% PLA 3D Printed!
Print all 18 pieces and 4 clips and they'll fit together pretty easily. Watch the YouTube video, I use a pliers for the Launch Spring and for the clips. I've left plenty room for tools in assembly, so I don't think most people will have any trouble. If parts seem like they fit really tight - your extruder settings probably need to come down a few percentages.
I included extra tight & loose rocket tips if needed for the best possible feel. The triangle sides have been extended 0.05mm and -0.05mm on those versions.
Again, see the YouTube Videos to get excited, for assembly, and if needed, to show the solve as well!
Leave your comments, and tune in for the next version RELEASED FEB 2021
OPTIONAL #4 and #5 Combination Lock wheels Now Available (1/19/2021)
These are all modular pieces that will be a part of a larger project... that I rambled on about in Episode 1 :P Basically, each puzzle becomes a side of Puzzle box that I call - the 5 aces. After the 4th Puzzle Box I'll release the final pieces required to do the full "5 Aces" Assembly. I'll also be printing and sending that puzzle box to a few youtubers to solve, and possibly selling a fully-assembled version on Etsy (if people are interested). Thanks for all the likes and feedback! I need more feedback always!
I'd love a like, follow, subscribe, etc. I'm hoping I can keep making cutting edge puzzle boxes bigger better and FREE for a long time!!!!
And Check Out The Key - Puzzle Box and More Puzzle boxes at my Thingiverse Page!
Like, Subscribe, Follow, Collect, and I'll keep making puzzle boxes!