The Launch - Puzzle Box by Leisure Luke. 100% Printed
The Launch - Puzzle Box by Leisure Luke. 100% Printed
3D
Published 2021-01-21T12:26:59+00:00
Must See YouTube Commercial & Assembly Instructions. EASY ASSEMBLY
https://www.youtube.com/watch?v=Fg1-mfWMYwI
SOLVE Video (Jan 28, 2021)
The Launch- Puzzle Box is an original design by Leisure Luke. It's a 22 Piece Puzzle Box that is SUPER EASY TO PRINT! No Supports Needed. Print it in PLA! Parts without squiggly spings can be PETG or PLA. Very little plastic used!
0.1mm tolerance for all non-sliding parts.
0.2mm tolerance for sliding parts
0.05mm increment tolerance for Rocket Tip to fit Rocket Base. You want this snug, but easy to pull apart.
You should be able to straight from the PRINT bed to ASSEMBLY! No External parts needed - no metal springs, no bearings, no magnets, no electronics, NO GLUE, NO SANDING... you get the idea!
As tested - 100% PLA 3D Printed!
Print all 18 pieces and 4 clips and they'll fit together pretty easily. Watch the YouTube video, I use a pliers for the Launch Spring and for the clips. I've left plenty room for tools in assembly, so I don't think most people will have any trouble. If parts seem like they fit really tight - your extruder settings probably need to come down a few percentages.
I included extra tight & loose rocket tips if needed for the best possible feel. The triangle sides have been extended 0.05mm and -0.05mm on those versions.
Again, see the YouTube Videos to get excited, for assembly, and if needed, to show the solve as well!
Leave your comments, and tune in for the next version RELEASED FEB 2021
OPTIONAL #4 and #5 Combination Lock wheels Now Available (1/19/2021)
These are all modular pieces that will be a part of a larger project... that I rambled on about in Episode 1 :P Basically, each puzzle becomes a side of Puzzle box that I call - the 5 aces. After the 4th Puzzle Box I'll release the final pieces required to do the full "5 Aces" Assembly. I'll also be printing and sending that puzzle box to a few youtubers to solve, and possibly selling a fully-assembled version on Etsy (if people are interested). Thanks for all the likes and feedback! I need more feedback always!
I'd love a like, follow, subscribe, etc. I'm hoping I can keep making cutting edge puzzle boxes bigger better and FREE for a long time!!!!
And Check Out The Key - Puzzle Box and More Puzzle boxes at my Thingiverse Page!
https://www.thingiverse.com/leisureluke/designs
Like, Subscribe, Follow, Collect, and I'll keep making puzzle boxes!
Enjoy!
Print Settings
Printer:
Artillery Sidewinder X1 V4
Resolution:
0.2
Infill:
15%
Filament brand:
TECBears, Stronghero, 3D Solutech
Filament color:
Marble, Black, White, Red, Blue, Gold
Filament material:
PLA or PETG or ABS
Notes:
Use PLA for The T6_222_Alien.stl and Rocket_Spring.stl. All the other parts can be PLA, PETG, or ABS
Part B has so far been the trickiest part to print for people, so use your favorites settings for that part. It's essentially printing two small parallel towers that connect at the bottom and at the top.
Use PLA for The T6_222_Alien.stl and Rocket_Spring.stl. All the other parts can be PLA, PETG, or ABS
Part B has so far been the trickiest part to print for people, so use your favorites settings for that part. It's essentially printing two small parallel towers that connect at the bottom and at the top.
Wheels flipped (fixed 1/18/2021)
| Date published | 21/01/2021 |
| Support Free | YES |