The mask box:
The mask box:
Published 2020-08-29T11:10:15+00:00
Hello,
I offer you a box that can be used to store your masks or something else.
You will need to print the handle, then 30 links.
All the ties and the handle are articulated with 1.75 mm pieces of filament.
Take the opportunity to use your leftover filament which remains at the end of the spool;)
If the joint rubs a little, it means that you have to sand the rounded parts of the links a little, normally there is a margin of 0.5 mm, which must be wide enough so that there is no problem.
For final assembly, do in order:
flexible door assembly
slide the flexible door in the left part
Make a blank assembly of the right part to confirm that there is no friction with the door
Glue the right part that aligns with the nipples on the left part. Be careful not to let the glue run on the door ;-)
And there it is.
If you want to be entertained, this impression was the subject of a video I made: (in french)
do not hesitate to change the filament color during printing of the left part to create decorative lines on your box. for example you can print in blue, and make two white stripes like the cover of a beautiful mustange GT500 ;-) or in multi color glitter to have the box of a unicorn (^_^)
For the links, I personally made the choice to put the side in contact with the glass of my bed outwards to have the shiny faceted effect when I handle the door.
I will be delighted to see the photos of your achievement.
Date published | 29/08/2020 |