TLR 22 3.0 / 4.0 Stand Up Trans Wheelie Bar Mount
$4.99 TLR 22 3.0 / 4.0 Stand Up Trans Wheelie Bar Mount
Published 2020-07-08T17:32:46+00:00
This will let you mount a Traxxas style wheelie bar onto a TLR 22SCT 3.0.
I recommend using 4 M3x20mm Screws to hold on the wheelie bar to the mount.
You will also need 3 M3x25mm screws to mount the wheelie bar mount to the shock tower.
A good wheelie bar is the strc version. Part Number - ST3678W
or check out rcracinginnovations.com for sweet carbon fiber bars
Print in the orientation the model loads into your slicer (as shown in the photo with the supports). Use at least 5 layers of dense supports. 0.15-0.2mm layers have been shown to be the strongest (CNCKitchen). Print this part with at least 4 perimeters and at least 50-100% infill. I recommend printing with PETG, ABS, Nylon, or Polycarbonate. Print at a relatively high temp to get the best layer bonding possible.
| Date published | 08/07/2020 |
| Price | $4.99 |
| Dimensions | 45.11mm x 30.15mm x 61mm |
