TOONED BIRDHOUSE V1.0
$4.95 TOONED BIRDHOUSE V1.0
3D
Published 2022-03-15T15:07:14+00:00
SPRING IS COMING! :) And i love making birdhouses, so here's my new one! :)
NOTE: FOR COMMERCIAL USE AND SELLING YOUR PRINTS, JOIN MY PATREON TO GET A FULL LICENSE. (see at the end)
FEATURES:
-100% support free
-All parts are already placed in the right orientation
-Large bottom door for cleaning between seasons
-3 diameter of entrance: 28.5mm, 32mm and 38.5mm (1.125in, 1.25in and 1.5in)
-Two types of installation (hanging and with rear support)
-Detailed exploded view to help you with the assembly
-Big parts can be done with a layer height of 0.3 with no problem to speed up printing time.
-Sturdy and strong design, with thick walls that won't deform overtime.
Be sure to have your bridge settings at "ON".
Watch for over extrusion. If you're having some fitting problems, simply sand gently the parts to help them fit together. But with a good calibration, everything should be fitting together very well.
Two types of trim for the roof: A blank one, and another one with an heart at the bottom.
For the window and door panes, they are FACING DOWN on the buildplate. Turn them over for installation.
For the hanging version, use the three files with "ROPE HANGING VERSION" in their name, instead. Build your house following the instruction, and at the end, simply thread a rope through the holes at top. Be sure to add some sealant around the holes to prevent water getting in.
If you have any problems, just send me a message.
Have fun!!!
For full access to all my models and for commercial license:
https://www.patreon.com/PA1_MAKER
| Date published | 15/03/2022 |
| Price | $4.95 |
| Support Free | YES |