Traveler's Bow - Breath of the Wild - Full Size
Traveler's Bow - Breath of the Wild - Full Size
Published 2020-04-07T15:40:12+00:00
Even though it is a free model, i spent a lot of time on the model, so if you want to support me in order to make more models like this one, you can buy me a coffee over at https://www.buymeacoffee.com/nKfukNx
Originally modelled for my BotW Link Cosplay back in 2018, i never got around to actually finishing the prop until February 2020, just due to procrastination.
If you print this, remember to sand the surfaces that is supposed to be glued together so that they are completely flat and have a lot of roughness for the glue to keep the parts together properly. Trust me, I learned this the hard way too late, after painting the bow, and suddenly having it snap in half due to too little surface for the epoxy glue to grab on to.
I hope that you share your prints with me, either here, or over at Twitter: https://twitter.com/EvanAWolf1
I am also working on a redesign of the bow, where the metal beams on the bow have dimensions to them
Print 2 of all the main parts (minus part E, only one is required) on the side in order to keep the stress of a elastic string from snapping the layers, added perk is that you get a wood-grain effect this way. The caps should be positioned so that one of the sides is touching the build plate.
Date published | 07/04/2020 |