This is a functional air splitter for the Traxxas Bandit. It will also fit the Traxxas 2WD Rustler but will require running front wheels from the Bandit. This splitter can be adjusted to produce significant down force to keep the bandit on the ground at high speed. It works best when used with a more aggressive rear wing. It is recommended to lower the ride height when using this splitter. This can be achieved by limiting straps or internal shock limiters (fuel tube on the internal shock shaft).
MATERIAL: For the best possible material use CF Nylon. PLA, PETG, ABS have been used with great success. Both the mount and splitter can be printed without support material.
Will print on a Ender 3 or similar printer.
For additional mounting hardware you will need:
Two 3X32mm screw (ONE - TRAXXAS PART NUMBER 3964)
Four 3X20mm screw (ONE - TRAXXAS PART NUMBER 2580)
Two 105mm turn buckle (ONE - TRAXXAS PART NUMBER 2339)
Four tall hallow balls (ONE - TRAXXAS PART NUMBER 5355)