Triple 1/64 Nascar Daytona Oval Display
Triple 1/64 Nascar Daytona Oval Display
3D
Published 2022-04-13T08:08:24+00:00
A display base for 1/64 scale cars, the display is designed to look like Daytona Oval start line. The display should fit most 1/64 nicely, it can fit 3 1/64 cars.
The cars I used in the photos are Nascars made by Action Collectibles.
If you wish to have a display base tweaked to fit to a different car from a different brand, please send me these dimension for the display base holes: https://imgur.com/5T6mb2L
The display base is separated into 3 parts for easy printing and colour swap. The parts are:
1) Base (Daytona Base.STL)
2) Base back wall (DaytonaDivider.STL)
3) Flat Base (DaytonaFlatBase.STL)
Print Settings
Nozzle size = 0.3 mm (Should be printable with 0.4)
Layer height = 0.2 mm
Filament change layer for colours on "DaytonaFlatBase.STL":
1) Start (Side stripe colour, mine is in yellow)
2) Layer 7 (Start line boxes, mine is in white)
3) Layer 11 (Start line boxes and road colour, mine is in black)
Filament change layer for colours on "DaytonaDivider.STL":
1) Start (Fencing colours, mine is in grey)
2) Layer 11 ("Daytona" lettering colour, mine is in black)
3) Layer 20 (Wall colour, mine is in white)
Assembly
The car is tied by wires through the hole in the base
Flat base and divider wall is recommended to use some glue or double sided tape to secure it on to the base.
Others
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.
I can be contacted through Instagram or Twitter too:
Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/
Custom display base designs are available for $5! Contact me to discuss what you want!
| Date published | 13/04/2022 |