Turboshaft Engine, with Radial Compressor and Turbine - Cutaway
$8.00 Turboshaft Engine, with Radial Compressor and Turbine - Cutaway
Published 2019-05-20T15:45:15+00:00
I made the running model of a turboshaft engine which uses a radial compressor and a radial turbine by vacuum cleaner before.
https://www.myminifactory.com/object/3d-print-turboshaft-engine-with-radial-compressor-and-turbine-75203
This is the purely cutaway model of it.
A. The features are as follows.
① Radial compressor (Impeller), Diffuser
② Radial turbine rotor, Turbine nozzle
③ Planetary reduction gears
④ Output shaft
⑤ No metal bearing is used for every shafts.
B. Assembly Manual (PDF format, total 16 pages)
The detail assembly manual including "Parts-List", "After printing treatment" and "Assembly procedure" are prepared based on "Standard Skill (Filing, Drilling, Tapping and painting)".
C. Purchase Parts
1. Screws
M1.4x3.5L, M2x4L, M2x15L, M3x8L, M3x80L
2. Others φ1x7L Piano Wire,φ5x110L AL Pipe
D. STL file
Total STL files are 39 items including the stand and tools.
Almost of parts are re-designed to this purpose.
“ws” of last 2 digits of file name means “With Support” special designed.
E. Total Net Print Time: Approx. 64HR
- (Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support)
Especially, Air-Intake-Case201mws.stl needs about 12 hours to print.
Note: When at actual print, each parameter may be adjusted by your experience.
F. Printing settings
Raft, Support, Layer Height, Infill: Depending on your experience.
My models were printed by "idbox" using with 0.4 nozzle, 1.75 PLA.
I do hope your success!!
[Update20190528] Sun-Gear & Manual changed.
See above
Date published | 20/05/2019 |
Price | $8.00 |