Twisted Planter with Legs, Vase Mode
Twisted Planter with Legs, Vase Mode
Published 2021-05-07T09:53:50+00:00
A Twisted Planter with Legs, 3D printable in 2 parts. The planter is designed to be printed in vase mode and the legs without supports (to save you some time :)).
For indoor and outdoor use.
I would suggest to connect the parts with some glue or double sided tape.
Total print time at 100% scale (~9 x 11 cm): 5 hours
Happy printing.
Part 1: Planter - vase mode
Nozzle size: 0.4, 0.6, 0.8
Layer Height 0.2mm
Layer Width/ thickness: 0.6, preferably 0.8 or 1mm (using a larger nozzle)
Print speed: 45mm/sec
Vase Mode enabled
Print time: 2.5 hours
Material: PETG
Part 2: Planter Legs base - normal mode
Nozzle size: 0.4, 0.6, 0.8
Layer height 0.2mm
Layer width/ thickness: 0.4
3 Perimeters
10 - 15% Infill
Print speed: 45mm/sec
No supports needed (print with legs up)
Print time: 2.5 hours
Date published | 07/05/2021 |
Time to do | 240 - minutes |
Material Quantity | 50 - 80 grams |
Dimensions | 90 x 110 mm |
Support Free | YES |