Twister Ornaments
Twister Ornaments
Published 2017-12-25T17:19:03+00:00
This model was created with VECTARY - the free, online 3D modeling tool
These are a set of 9 Christmas ornaments for the Christmas Vectary design competition. There are 3 shapes, each with 3 different amounts of pieces. The ornaments are really fun to play with and not too difficult to print. Works great as toy and ornament for the tree, overall modern aesthetic and neat design. After printing some sanding may be required for them to slide smoothly.
To hang the ornament run a thread or thin string through the centre of the pieces, tie a substantial know below the bottom side and a loop on the top side, then hang with care.
If you want individual STL files, go to the VECTARY page, into the file and export the individual objects.
You can also download the stl file here, i found that many 3d slicers can easily separate the stl into it's individual components.
https://www.vectary.com/u/wilbertcox.connor/twister-ornaments
The different version are as follows...
note: for each ornament the individual pieces are identical so only one stl per ornament has to be downloaded and sliced.
Sphere, 2 sections
Sphere, 3 sections
Sphere, 4 sections
Icicle, 2 sections
Icicle, 3 sections
Icicle, 4 sections
Tear Drop, 2 sections
Tear Drop, 3 sections
Tear Drop, 4 sections
#madewithvectary
Credits:
Print with pretty good accuracy, about 0.2mm, support structures required. I printed mine sideways on the print bed with 2 points of contact, this allowed for it to be stable and fewer supports.
Date published | 25/12/2017 |
Time to do | 420 - 720 minutes |
Material Quantity | 30-40 meters per ornament |
Dimensions | 80*80*80 |