Under shelve key or cloth hook
Under shelve key or cloth hook
3D
Published 2019-01-07T15:41:04+00:00
This is a hook you can print and install with one screw underneath any shelve for an extra place to hang a key, dishwashing cloth or towel from. I designed it to be added to our existing key rack which only has four existing hooks, but since it has in built in shelve on top, it provided the perfect space for more keys. I could have grasp some boring hook from my garage but decided to design and print someting instead which would be more interesting.
The defaul STL file is th 100% size, which is too big for a key but perfect for a towel (see images). The 50 and 75% sixe gcode files are provided as well if you don't want to scale it yourself and print directly to your printer at the appropriate fill percentage.
This part can be printed with a 10 to 20% fill. The default size allows for quite a bit of downscaling to produce a smaller hook while still being suffciently strong. For a smaller scaled print, a larger fill percentage should be used to increase strength. The 100% scale print (STL file provided) prints well with a 10 percent fill. The 50% scaled file prints best at 25% fill.
| Date published | 07/01/2019 |
| Time to do | 2 - 3 minutes |
| Dimensions | 50.8mm x 51.4mm x 63mm |
