Universal Bike Pump Mount
Universal Bike Pump Mount
3D
Published 2020-05-13T11:40:12+00:00
This pump holder should clamp to any bicycle so long as the frame cross section is circular. It should also hold any diameter pump. You will probably need two clamps to hold the pump securely.
You will need:-
- M4x20mm bolts (2)
- M4x12mm bolts (1)
- M4 nuts (3)
- cable tidy straps (2)
Fit the straps to the mount as shown in the images with the 12mm long bolt and a nut. Then attach to the bicycle with the 20mm long bolts and nuts.
You may need to trim the straps to the correct length.
Printer: Ender 3
Resolution: 0.20 mm
Speed 50mm/s
Material: PETG
Nozzle Temp: 240°
Bed Temp: 70°
Infill: 15%
Walls: 3
Top Layers: 4
Bottom Layers: 4
You will need supports for the pump mount section of the assembly. Please orientate it as shown in the print bed image for best results.
| Date published | 13/05/2020 |
| Time to do | 136 - minutes |
| Material Quantity | 24 grams |