Uzi Replica
Uzi Replica
Published 2019-12-06T18:57:06+00:00
Uzi replica produced from pictures of the real fire arm, created on Fusion 360.
Prints in seperate pieces to make life easier. A bit of superglue and its all done. 8 in total - main body, handle, barrel, top rail, bottom rail, trigger, magazine and handle.
Clearance cuts have been made (0.3mm offset) to all interlocking sections to ensure a good fit between parts.
Hope you like the model, I plan on doing more weapon replicas as this was fun ;)
Supports are required for most parts, some can be avoided if your machine is able to bridge well.
I recommend high infill/shells for the trigger and handle parts - I used 50% rectilinear.
For the remaining parts I used 2 shells with 10% rectilinear infill. 3 bottom layers and 4 top layers.
Date published | 06/12/2019 |