Voronoi Lamp
26,763
views
3,982
downloads
62
collections
4 comments
Loading comments... 
Voronoi Lamp
Published 2018-11-05T11:46:55+00:00
1504
4
Add to Collection
Description
This voronoi style lamp is split into multiple parts which makes it easy to print.
Instructions:
- Download and print all the required pieces. I recommend printing in a very opaque dark color to decrease the risk of light leakage and spray painting it if you want a lighter color. If your printer is well calibrated you can print it solid and it will also look good. Use a less opaque filament for the bottom parts if you want the effect I have.
- Assemble. I recommend gluing the sides and top together, taking special care with corners so that light doesn't shine through.
- Add lamp. A typical E14 lamp holder will work, but to get clean shadows you want a very small light source. I used an IKEA LEDBERG without the lens.
Scaling:
For E14 lamps I recommend using the full size, but for LEDBERG I find it nicer to print it at approximately 85% scale. I've added a LEDBERG specific base for 85% size. Just scale all the other parts on all axes and print the smaller base.
Technical Information
| Date published | 05/11/2018 |
| Dimensions | 113.71mm x 113.71mm x 8.53mm |
| Technology | FDM |
| Complexity | Easy |
| Support Free | YES |
More Information
Object Parts
https://www.ikea.com/hu/hu/p/ledberg-led-es-spotlampa-feher-00400927/