Wacom Bamboo Finleine Tablet Grips
Wacom Bamboo Finleine Tablet Grips
3D
Published 2019-02-13T08:00:10+00:00
Have you ever had struggles writing/drawing on your tablet with your Bamboo finline tablet pen? Behold grips that slide on to both styles of pens! printed in Ninjaflex TPU for both grip and durability, these will last for awhile. if one doesn break on you, they take less than an hour to print.
these were modeled in Fusion 360 in about 15 minutes. any Flex material should work, but Ninjaflex is what i used. I wouldn't try printing these in any PLA, ABS, or PETG since those materials are rigid.
Difficulty: Medium
Print Speed: 10mm/s
Infill: doesn't Matter
Nozzle Temp: 230c
Bed Temp: 50c-60c
Nozzle Diameter: 0.4mm
Material: Ninjaflex Grass (any flexable material should work, as long as it can stretch a little)
Extra Steps: you may have to take some flush cutters and trim extra TPU on the inside of print. while it doesn't need this, you do risk getting the print stuck on the pens.
| Date published | 13/02/2019 |
| Time to do | 30 - 31 minutes |
| Material Quantity | 2 grams |
| Dimensions | 13mm x 11mm x 26mm |
| Support Free | YES |
