Watch Case - 3D Printed Build
Watch Case - 3D Printed Build
Published 2017-08-08T22:57:48+00:00
This build is an easy project that adds a little style to your watch collection. This is a simple 2 watch design using simple components and 3D printed parts. The cost is roughly $25 in components and it takes about 17 or so hours to print.
Watch Case (decent surface quality to limit amount of sanding needed)
• Filament choice not really important
• 0.2mm layer height
• 25-30% infill (ideally you use multiple processes and use 100% infill for at least the first
10mm if you can)
• Support is optional depending on overhang performance • Brim optional
Cover and Cover Back Plate (decent surface quality to limit amount of sanding needed)
Filament choice not really important
0.2mm or higher layer height
15-20% infill
Support recommended
Brim optional
Date published | 08/08/2017 |
Time to do | 930 - 1020 minutes |